GM's 6.2L V8 Engine Recall: The Crankshaft Crisis and Why Switching to 0W-40 Oil Matters

URGENT: GM 6.2L V8 Engine Recall

NHTSA Recall #24V795000 affects approximately 800,000 vehicles with potentially catastrophic engine failure risk.

Affected Vehicles (2021-2024 Model Years):

• Cadillac Escalade & Escalade ESV
• Chevrolet Silverado 1500
• Chevrolet Tahoe & Suburban
• GMC Sierra 1500
• GMC Yukon & Yukon XL

All equipped with the 6.2L V8 (L87) engine

General Motors has issued a critical recall for vehicles equipped with the 6.2L V8 engine due to manufacturing defects that could lead to complete engine failure. The issue centers on potential defects in the connecting rods and crankshaft — components that are fundamental to engine operation.

The connecting rods link the pistons to the crankshaft, converting the linear motion of the pistons into rotational motion that powers your vehicle. When these components fail, the results can be catastrophic, potentially causing engine seizure while driving or even breaching the engine block.

Your work truck or towing rig May Be at Risk

The Problem: Manufacturing defects in critical engine components
The Risk: Sudden engine failure without warning
The Cost: $15,000-$25,000 for engine replacement (if not covered)
The Solution: Immediate recall service and switch to 0W-40 oil

Understanding the Crankshaft Crisis

What’s Going Wrong?

The 6.2L V8 (RPO L87) engines in these vehicles may have been manufactured with defective connecting rods and crankshafts. These defects aren’t visible to the naked eye but can cause:

1. Premature Wear

   • Rod bearings deteriorate faster than designed
   • Increased clearances develop between components
   • Metal-to-metal contact begins

2. Progressive Failure

   • Metal particles contaminate the oil system
   • Additional components suffer accelerated wear
   • Oil pressure drops as clearances increase

3. Catastrophic Failure

   • Rod bearing spins or seizes
   • Connecting rod breaks free
   • Engine block can be breached (window failure)

Why This Is So Serious

Unlike many recalls that address minor issues, this recall involves the engine’s core rotating assembly. When these components fail:

• Immediate Loss of Power: Engine stops without warning
• Safety Risk: Loss of power steering and braking assistance
• Secondary Damage: Metal debris can destroy the entire engine
• Fire Risk: Hot oil escaping through a breached block

The GM Recall Remedy

What GM Is Doing

GM’s solution involves a three-part approach:

1. Engine Inspection

   • Dealers will inspect the engine for existing damage
   • Oil analysis may be performed
   • Engine noises and performance evaluated

2. Oil Specification Change

   • OLD: 0W-20 synthetic oil
   • NEW: 0W-40 synthetic oil (permanent change)
   • Provides 2X thicker oil film at operating temperature

3. Updated Oil Filler Cap

   • New cap displays “USE 0W-40 ENGINE OIL ONLY”
   • Prevents accidental use of wrong oil grade
   • Permanent reminder of new requirement

Why 0W-40 Oil?

The switch from 0W-20 to 0W-40 is critical because:

Thicker Oil Film

• 0W-40 maintains a thicker protective layer between metal surfaces
• Better cushioning for potentially compromised bearings
• Reduced metal-to-metal contact

Higher Film Strength

• Resists breakdown under extreme pressure
• Maintains protection even with increased clearances
• Better heat dissipation properties

Improved Shear Stability

• Maintains viscosity longer under stress
• Doesn’t thin out as quickly as 0W-20
• Critical for damaged or wearing components

The AMSOIL Advantage for Recalled Engines

Why AMSOIL Signature Series 0W-40 (AZF)?

When your engine’s integrity is at stake, you need the best protection available. AMSOIL Signature Series 0W-40 Synthetic Motor Oil (AZF) is dexos® R approved and provides:

75% More Engine Protection

• dexos® R approved - GM’s highest performance specification
• Exceeds GM dexos1® Gen 3 specifications
• Passes severe Sequence IIIH and IVB wear tests
• Protects against wear in compromised engines

Exceptional Film Strength

• Maintains protective barrier under extreme conditions
• Resists breakdown at high temperatures
• Critical for engines with potential defects

Regular Oil Changes Critical

• Follow manufacturer’s service intervals
• More frequent changes recommended for recalled engines
• Monitor oil condition closely

Critical Warning Signs

Stop Driving Immediately If You Notice:

1. Engine Noises

• Knocking or tapping from the engine bay
• Rattling sounds that increase with RPM
• Grinding noises during acceleration
• Sudden loud bang followed by loss of power

2. Oil Issues

• Metal shavings in the oil or on dipstick
• Rapid oil consumption (more than 1 qt per 1,000 miles)
• Oil pressure warning light
• Milky or foamy oil appearance

3. Performance Problems

• Rough idle or engine vibration
• Loss of power during acceleration
• Engine stalling or difficulty starting
• Check engine light with codes P0300-P0308 (misfires)

4. Visual Indicators

• Oil leaks under the vehicle
• Blue or white smoke from exhaust
• Steam or smoke from engine bay
• Visible damage to engine components

What You Need to Do NOW

Step 1: Check Your VIN

Visit NHTSA.gov/recalls and enter your VIN to confirm if your vehicle is affected.

Step 2: Schedule Service

Contact your GM dealer immediately to schedule the recall service. This is performed at no cost to you.

Step 3: Monitor Your Engine

Until service is completed:

• Check oil level weekly
• Listen for unusual noises
• Watch for warning lights
• Document any symptoms

Step 4: Use Proper Oil

After recall service, ONLY use 0W-40 synthetic oil:

• Never use 0W-20 again
• Choose high-quality synthetic oil
• Consider AMSOIL for maximum protection

Step 5: Maintain Records

Keep all documentation:

• Recall service receipts
• Oil change records
• Any engine-related repairs
• Communication with dealers

Long-Term Ownership Considerations

What This Means for Your Vehicle

Resale Value Impact

• Recalled vehicles may have lower resale value
• Proper documentation is critical
• Consistent use of 0W-40 oil is mandatory

Warranty Implications

• Follow GM’s oil specifications exactly
• Use only API SP or dexos1® Gen 3 approved oils
• Maintain proper service intervals

Future Reliability

• Even after recall service, monitor closely
• Consider more frequent oil analysis
• Be prepared for potential future issues

Fleet and Commercial Operators

For Georgia businesses operating these vehicles:

Immediate Actions:

• Audit entire fleet for affected VINs
• Prioritize high-mileage units for service
• Update maintenance protocols for 0W-40 oil

Ongoing Management:

• Implement oil analysis programs
• Consider shortened oil change intervals
• Document all maintenance meticulously

Frequently Asked Questions

Technical Specifications Comparison

Oil Viscosity Changes

Specification	Original (0W-20)	Updated (0W-40)	Improvement
Cold Flow	0W	0W	No Change
Operating Viscosity	20 weight	40 weight	100% Thicker
HTHS Viscosity	2.6 cP minimum	3.5 cP minimum	35% Higher
Film Strength	Standard	Enhanced	Significant
Shear Stability	Good	Excellent	Major Upgrade

Why This Matters

The High Temperature High Shear (HTHS) viscosity is critical for protecting rod bearings under load. The 35% increase in HTHS viscosity with 0W-40 oil provides substantially better protection for potentially compromised components.

Local Support in Georgia

As your local AMSOIL dealer, we’re here to help Georgia drivers navigate this recall:

We Provide:

• Expert Guidance on oil selection for recalled engines
• AMSOIL Signature Series 0W-40 (AZF) - dexos® R approved
• In stock for immediate delivery
• Oil Analysis Services to monitor engine health
• Fleet Support for commercial operators

Contact Us Today

Phone: 1-678-944-8816
Dealer #: 1858536
Quick Shop: AMSOIL.com

Protect Your Investment

The GM 6.2L V8 recall is a serious issue that requires immediate attention. While GM’s remedy of switching to 0W-40 oil helps protect these engines, choosing the right oil is critical for long-term reliability.

AMSOIL Signature Series 0W-40 (AZF) provides the maximum protection these potentially compromised engines need, with:

• Superior wear protection
• Exceptional film strength
• dexos® R approved formulation
• Peace of mind

Don’t wait for symptoms to appear. Check your VIN today, schedule your recall service, and protect your engine with AMSOIL 0W-40 synthetic motor oil.

Take Action Now:

1. Check Recall Status: NHTSA.gov/recalls
2. Schedule Service: Contact your GM dealer
3. Order AMSOIL 0W-40 (AZF): Shop Now
4. Questions? Call us at 1-678-944-8816

---

Disclaimer: This article is for informational purposes only. Always follow manufacturer recommendations and recall instructions. AMSOIL INC. is not affiliated with General Motors. All trademarks are property of their respective owners.